Just throw your own QSL in, that's where you want the prized DX to go to via
the antenna and tower.
Mike
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Richard Thorne
Sent: Monday, October 31, 2011 3:44 PM
To: Towertalk
Subject: [TowerTalk] QSL card in the hole before the concrete pour
Well my concrete guy solve my problem of going square or round on the
base of the tower, he made it square, and over sized at that. He's
going 4' square by 4' deep, that should hold up some tower.
I also moved my guy points out a bit. Its an 80' tower and I had the
guy points at 65' originally, I moved them out to 80' so it will give me
more room to stack antennas between the 40' and 80' levels.
Now for the more important question. If I remember correctly, I'm
supposed to sacrifice a prized qsl card by throwing it in the bottom of
the hole prior to the pour, correct?
Rich - N5ZC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1834 / Virus Database: 2092/4586 - Release Date: 10/31/11
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|