Bill Aycock wrote:
>Steel balls in an aluminum race WILL pit, due to vibration. This is
>actually worse when the shaft is not rotated very often, because the
>pits just get worse. Failure comes, not from use, but from non-use.
It's the same with diecast rotor gears. If the antenna is parked
habitually in one direction, moving slightly in the wind, all the metal
fatigue is concentrated into one or two teeth.
>Ask me how I know.
Same here.
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|