Towertalk
[Top] [All Lists]

Re: [TowerTalk] TowerTalk Digest, Vol 106, Issue 6

To: towertalk@contesting.com
Subject: Re: [TowerTalk] TowerTalk Digest, Vol 106, Issue 6
From: "Jack C. Shutt" <w9gt@frontier.com>
Date: Thu, 6 Oct 2011 23:53:45 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>








My concern with using STUFF is that it might migrate into the center conductor 
connection and cause a discontinuity.  Has anyone had this problem?  Certainly 
the various sealing tapes and "connector kits" work wello for sealing the 
outside of connections.

73,  Jack, W9GT

Message: 4
Date: Wed, 05 Oct 2011 09:47:57 -0400
From: Alan NV8A <nv8a@charter.net>
Subject: Re: [TowerTalk] re;   STUF Weather Proofing compound...
To: TOWERTALK@contesting.com
Message-ID: <4E8C600D.6010400@charter.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

I used both: STUF on the inside as well as Coax-Seal on the outside.

Alan NV8A


On 10/04/11 05:53 pm, john@kk9a.com wrote:

> I have never used "Stuff", I imagine that it would be hard to clean out of
> the connector afterwards.  It probably does no harm, but it is better to
> spend your efforts sealing the outside of the connector properly.
>
> John KK9A
>
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TowerTalk] TowerTalk Digest, Vol 106, Issue 6, Jack C. Shutt <=