On 10/1/2011 8:39 PM, Phil & Debbie Salas wrote:
> I use the DXE strippers with my crimp connectors. After stripping, all that
> is necessary is to snip back the center condutor so the crimp pin is just
> about flush with the inner dielectric.
>
> Phil - AD5X
Thanks Phil.
I should be receiving my DXE stripper via UPS this week.
Tony
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|