Towertalk
[Top] [All Lists]

Re: [TowerTalk] 30 meter yagi

To: <Cqtestk4xs@aol.com>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] 30 meter yagi
From: "Stan Stockton" <stan@aqity.com>
Reply-to: Stan Stockton <stan@aqity.com>
Date: Thu, 29 Sep 2011 08:29:58 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Bill,

OD        Wall        Exposed Length        Overall Length

.375        .058            32                            36
.500        .058            32                            36
.750        .116            68                            72
1.000      .116            68                            72
1.250       .116           68                            72
1.500        .116          36                            36

Half element lengths, .058 = single wall, .116 = double wall, uses 
6063-T832 and is good for 89 MPH.  Each element weighs 18.17 pounds. 
Lengths  shown would resonate well below 10 Mhz so the MPH rating of 89 
MPH is very worst case.

The cost from Cycle-24.com would be $97.20 per element.

Stan, K5GO


----- Original Message ----- 
From: <Cqtestk4xs@aol.com>
To: <TOWERTALK@contesting.com>
Sent: Thursday, September 29, 2011 8:13 AM
Subject: [TowerTalk] 30 meter yagi


> Looking for plans to build a 3 el Yagi for 30 meters...nothing  fancy. 
> I
> don't need one engineered for 150 MPH, but don't want to have it  look 
> like
> spaghetti at 50 MPH.
>
> Any ideas?
>
> Bill KH7XS/K4XS
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>