Not always. I have had freight delivery here where the shipper specified a
lift-gate truck for the deliver, in those cases the driver will get the
pallet off the truck and onto the ground... Not necessarily exactly where
you want it, but at least off the truck. Pickups can be done the same way,
but of course expect to pay more for the service and be darn sure it is
packed properly and accessible to the driver with a hand pallet lift.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
> -----Original Message-----
> From: Al Kozakiewicz [mailto:akozak@hourglass.com]
> Sent: Tuesday, September 20, 2011 15:24
> To: K1TTT; yccc@yccc.org; towertalk@contesting.com
> Subject: RE: [TowerTalk] shipping large, heavy object
>
>
> Anything that heavy shipped as a single unit is freight. The
> first rule of LTL shipping is that the truck driver drives
> the truck and stinks up the bathroom if you let him use it.
> Nothing else. You're responsible for loading the truck and
> the recipient is responsible for unloading. The prerequisite
> for both is a loading dock and a forklift or a pallet jack.
>
> The prerequisite for parcel shipping is that the parcel has
> to be liftable by a man - any man. If you're going to ship
> 185 lbs by parcel, you'll need to disassemble it into pieces
> that meet the maximum weight and size limits.
>
> If it was me, I'd bring it to work where there are both
> loading docks and forklifts and arrange for freight pickup
> there. Or sell it to someone who takes complete
> responsibility for transportation - incoterms EXW.
>
> Al
> AB2ZY
>
> ________________________________________
> From: towertalk-bounces@contesting.com
> [towertalk-bounces@contesting.com] On Behalf Of K1TTT [K1TTT@ARRL.NET]
> Sent: Tuesday, September 20, 2011 10:42 AM
> To: yccc@yccc.org; towertalk@contesting.com
> Subject: Re: [TowerTalk] shipping large, heavy object
>
> Find a UPS Store in your area and ask them about it. It is
> surprising the
> size of stuff they will pack and ship for you. Check for
> other companies
> that may pack and ship furniture or machinery also.
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>
> > -----Original Message-----
> > From: Jim Walker [mailto:jim@walkersdomain.com]
> > Sent: Tuesday, September 20, 2011 13:59
> > To: 'Jim Spears'; yccc@yccc.org; towertalk@contesting.com
> > Subject: Re: [TowerTalk] shipping large, heavy object
> >
> >
> > I highly recommend strapping it to a pallet with metal
> > banding. Contact
> > freight companies with terminals in your area and obtain
> > shipping costs to
> > the buyer's destination. If you can get the winch to the
> > chosen shipper via
> > pickup truck, etc. it will save local transport charges.
> >
> > If you can get it to the shippers terminal, if you have
> > loaded the pallet
> > correctly they will be able to get a forklift under it to
> off load it.
> > Then, it?s the buyer's responsibility to figure out how to
> > get it home on
> > his end.
> >
> > Jim
> > KBØX
> >
> > -----Original Message-----
> > From: towertalk-bounces@contesting.com
> > [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Spears
> > Sent: Tuesday, September 20, 2011 8:48 AM
> > To: yccc@yccc.org; towertalk@contesting.com
> > Subject: [TowerTalk] shipping large, heavy object
> >
> > I purchased an electric winch, US Tower MDP-750 from a guy
> > who was close
> > enough to pick it up at his home. After getting it home and
> > mulling over
> > the challenge ahead, I decided it would be too hard to
> > integrate this winch
> > (which has a complicated pull up/pull down design) onto my
> > crankup tower and
> > sold it. The winch is pretty large and heavy, 185 pounds
> > according to the
> > US Tower catalog (and I believe it).
> >
> >
> >
> > I am starting to work with the new buyer on shipping. And I
> > need a starting
> > point. I would guess it needs to be strapped to a pallet.
> > Any suggestion
> > on a shipper? Will FedEx ground handle something like this?
> >
> >
> >
> > I am getting real tired of manually cranking the tower up and
> > down but need
> > a simpler approach. Something like the MDP-75 is more in my thought
> > process.
> >
> >
> >
> > Jim/N1NK
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|