The hairpin match only effects the length of the driven element, usually it
is shortened. The other elements should match your model. The Hy-Gain
bracket may be difficult to model, but I don't see how that would effect the
overall length.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Yagi mounting and modeling software
From: Doug Snowden <dougn4ij@gmail.com>
Date: Mon, 19 Sep 2011 15:00:17 -0500
A recent post made me think of this question. I have been playing with
the free MMANA modeling software, as well as the older Yagimax. My
first models were the usual dipole etc. I started playing with yagis,
and one thing I tried to do was to model a
Hygain 204ba. I can arrive at decent pattern, f/b, gain etc. All of
the models I have seen seem to model the HyGain antennas with shorter
elements than the actual measurements from a Hygain assembly manual.
The actual measurements are a foot or more longer for, say the
reflector than the modeled antenna. Other elements are similar in
difference. The K4VX Yagimax seems to agree with the modeling files I
see. The ARRL has a ZIP file with all of the HyGain designs. The
models include the 3 inch boom mounting dimensions too. I have
changed element tapers. and this does not have anywhere near the
influence to change the results that I see. I am confused, but, as
usual, it will be something I have overlooked. Would this have
something to do with the Beta (hairpin) match that HyGain uses?
Doug, N4IJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|