Towertalk
[Top] [All Lists]

Re: [TowerTalk] Phasing transformer questions.

To: "Towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Phasing transformer questions.
From: "Tom Osborne" <w7why@frontier.com>
Reply-to: Tom Osborne <w7why@frontier.com>
Date: Sun, 21 Aug 2011 16:43:48 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Clint.

If you get any answers, I'd sure like to see them.  I'm interested in the 
same thing.  Hope guys post to TT.  73
TomW7WHY



>I am phasing two verticals together for 30M and using the Trifilar wound
> toroidal transformer found in Joe Carr's "Practical Antenna Handbook" to 
> do
> so.  A friend, (more knowledgeable than I,) calculated 19 turns on a 
> T300-2
> core.  I recently found the core and now other questions have arisen.
>
> Does the winding have to be solid wire, or can I use stranded wire, or 
> does
> it matter?  And should the windings be flat wound, such as ribbon cable, 
> or
> twisted together? I have seen both methods.
>
> Any other information which I really need to know would also be 
> appreciated.
>
>
>
> Clint - W5CPT
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> 


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>