On 7/18/2011 4:23 PM, Dave Hachadorian wrote:
> What usually happens when the filter fails is that one or both of
> the capacitors on the radio side of the Pi changes value.
I came to the conclusion soon after starting to use these filters
several years ago that they are VERY under-designed in terms of the
power handling of the capacitors. They "sort of" hold up in line
between my transceiver and power amp at a level of 50W or less, but they
will fry (or change value) with 100W into real antennas.
IMO, The ONLY reliable way to use these filter sets is at the RX IN / RX
OUT patch point of a rig like the K3, where they never see TX power but
do protect the RX.
I've given up on mine, and now use W3NQNs.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|