Towertalk
[Top] [All Lists]

Re: [TowerTalk] Self-supported tower designs

To: 'Grant Saviers' <grants2@pacbell.net>, Máximo EA1DDO_HK1H <ea1ddo@hotmail.com>
Subject: Re: [TowerTalk] Self-supported tower designs
From: Al Kozakiewicz <akozak@hourglass.com>
Date: Thu, 14 Jul 2011 23:09:02 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Straying somewhat afield from the original topic...

G0EVY has a full size 2 element 80m beam (think about that for a minute).  I 
forget what he said it weighs, but somewhere north of 3000#.

He bought a used truck mounted crane with a 150' boom that the antenna is 
suspended from.  If you look at his property on Google Earth, it's VERY visible 
from the satellite picture.

Al
AB2ZY

-----Original Message-----
From: towertalk-bounces@contesting.com 
[mailto:towertalk-bounces@contesting.com] On Behalf Of Grant Saviers
Sent: Thursday, July 14, 2011 10:27 PM
To: Máximo EA1DDO_HK1H
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Self-supported tower designs

A used boom lift might be a good alternative to building a tower.  I've been 
tracking the used market and they go for $10k to $15k, used in good condition 
for 50-60 footers.  (About the installed cost for a 72'  crank
up)  Generally, they can handle 500# loads at full extension at 45 degrees, 
some are even rated 1000#.  So, my educated guess is a pretty big tribander 
straight up is no sweat on a few feet of mast.  Of course, it's pretty easy to 
work on the antenna and bring it down for a storm or hurricane.

Think of the power of the built in rotator!  And they are a lot of fun to run, 
put antennas in trees, fix your roof, paint the house, etc.

Might also be an answer for hams with tower restrictions - :-) :-) :-)

Wherever there is multistory construction there are a lot of them.  
Several on ebay and craigslist most all the time.

Grant
KZ1W

On 7/14/2011 12:38 PM, Máximo EA1DDO_HK1H wrote:
> Hi all,
>
> I am thinking to build a self-supported tower for my HK1H´s station.
> The tower could be around 25 meters high. Four sides Thinking in 
> something like this;
>
> http://3.bp.blogspot.com/_umpsa6tUB2I/SoPi1PjpbtI/AAAAAAAAABk/9DQ2BrH3
> jek/S660/PANORAMICA.JPG
>
> or this one;
>
> http://farm1.static.flickr.com/98/383631062_89cc03d2f0.jpg
>
> What I need is a design layout to know what size pipes to use.
> Anyone knows where can I found them?
>
> Thanks
>
> 73, Maximo - EA1DDO&  HK1H
>                                       
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>