okay, I'll give em a try. Just put in an order @ Allied electronics. I
went to amphenol's site, and their drawing shows an .125" ID for the pin,
but oddly doesn't show the OD. The ones I have might be .015 or so shy of
their spec
thanks all for the help
jim
w6jmf
On Wed, Jun 22, 2011 at 3:58 PM, Mark Robinson <markrob@mindspring.com>wrote:
> Yes that center conductor is big. The connectors that work with this coax
> are Amphenol connectors UHF-182120 that I buy from The RF Connection. I use
> this coax a lot and have put on many connectors. I had the same problems
> initially but the UHF-182120 connectors work a treat. Make sure that you
> don't disturb the weave/lay of the inner conductor.
>
> No need to snip any strands away with this connector.
>
>
> Mark N1UK
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|