On 6/14/11 6:50 AM, Rob Atkinson wrote:
A run of RG213 of only 100 feet can provide a surprising amount
> of loss on 1.8 MHz to a matched load--the best possible
> conditions--and a dB here and there and it starts to add up.
<0.25 dB for 100ft of Belden 8267 (an RG-213 type), LMR 400 is 0.162 dB
RG-58 type (solid dielectric) is about twice that. LMR240 is 0.36dB
low density dielectric helps a bit, but you'd have to decide whether .1
dB for 100 ft is worth it. (goes up as sqrt of frequency.. at 30 MHz,
the RG213 is at 1.1 dB/100ft)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|