Correct.
In addition I just sent Tony & a few others pix of my sparkplug + resistor
bleeder kludge. None of this is my invention, nor magic, just copying other
people's good ideas. Also not guaranteed to protect you from The Big One,
but will help bleed off charges. If you want some ideas, I'll be happy to
forward the email + photos to others since the reflector does not support
attachments. Email me off list if interested.
73
Dan
K0DAN
----- Original Message -----
From: "Stan Labinsky Jr." <wa2puq@frontiernet.net>
To: "reflector -tower" <towertalk@contesting.com>
Sent: Saturday, May 14, 2011 7:07 PM
Subject: Re: [TowerTalk] Discharge with a dipole
> Actually, since you are running the balun, you could just run a piece of
> copper flashing, say 1 to 1.5" wide from the coax shield to a ground rod
> just outside of the entrance of the antenna cable into the shack. Would
> also be a good place to include a lightning arrestor which will protect
> your
> radio's receiver input and give a convenient place to make that
> connection.
> The balun is making it so you can run coax, unbalanced line. Grounding
> the
> shield should not affect antenna tuning and will provide a path for any
> static buildup or worse.
>
> Stan
>
> ----- Original Message -----
> From: "W1JCW" <W1JCW@hotmail.com>
> To: "reflector -tower" <towertalk@contesting.com>
> Sent: Saturday, May 14, 2011 7:48 PM
> Subject: [TowerTalk] Discharge with a dipole
>
>
>>A previous post suggested a spark plug on each terminal the ladder line
>>connected to.
>>
>> So the resister would go from each terminal and tie the other end to a
>> ground rod ?
>>
>> I run 250' center feed 450 ladder line down to a 4:1 balun.
>>
>> 73-
>> W1JCW
>> John
>>
>>
>> From: Jim Lux
>> Sent: Saturday, May 14, 2011 5:59 PM
>> To: K2VI
>> Cc: <towertalk@contesting.com>
>> Subject: Re: [TowerTalk] zapped with my dipole. OUCH!
>>
>>
>> A 1meg resistor to ground?
>>
>> On May 14, 2011, at 13:29, "K2VI" <k2vi@cox.net> wrote:
>>
>>> It seems every time there's distant lightning and i go to disconnect the
>>> dipole i get this nasty discharge when i touch the pl-259. Im concerned
>>> it will eventually damage my tuner and or radio. The antenna is not dc
>>> grounded like my beam or vertical are. It is a ladder line fed antenna
>>> terminating into a 4:1 balun outside the shack and a 3' run of rg8 coax
>>> to the tuner. How can i bleed this static off? I heard from a ham friend
>>> the jump a 2.5 MH RF choke between the two terminals of the 4:1 balun
>>> where the ladder line connects.Any advice would be greatly apreciated.73
>>> tony k2vi
>>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|