Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator mast mount

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rotator mast mount
From: Clay W7CE <w7ce@curtiss.net>
Reply-to: w7ce@curtiss.net
Date: Fri, 29 Apr 2011 08:40:16 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Pete, thanks for pointing out the Custom Metalworks side mount.  I 
wasn't familiar with that one, but I agree that looks like a much better 
solution, especially for a heavy yagi like the 3el SteppIR.

73,
Clay  W7CE

On 4/29/2011 8:29 AM, Pete Smith wrote:
> For what it's worth, I think a much better design is that by Custom
> Metalworks, because it spreads the load of the side-mounted stuff to all
> three legs instead of just one. Easy to reverse-engineer for your own use.
>
> 73, Pete N4ZR
>
> The World Contest Station Database, updated daily at www.conteststations.com
> The Reverse Beacon Network at http://reversebeacon.net, blog at 
> reversebeacon.blogspot.com,
> spots at telnet.reversebeacon.net, port 7000
>
>
>
> On 4/29/2011 11:14 AM, Clay W7CE wrote:
>> On 4/28/2011 10:31 AM, K8RI on TT wrote:
>>> On 4/29/2011 12:25 AM, Guy Molinari wrote:
>>>> Anyone have any recommendations for mounting a Ham IV atop a 2" mast 
>>>> section.    I'm building a standoff mount on one of my towers for a 3 
>>>> element SteppIR.   I've got some 2" angle iron that I'm going to bolt in 
>>>> place of 2 sets of steps on my AB-105 tower.   This will allow for about a 
>>>> 4' piece of mast held about 10-12" from the tower.
>>>>
>>>> Now I just need to track down a mount for the Ham IV.   I should get about 
>>>> 100 degrees or so of azimuth.   Together with the 180 feature of the 
>>>> SteppIR it should do the trick for JA/CA mults and for keeping the US off 
>>>> my QRG when I've got the big boys pointed at EU.
>>> I would strongly suggest a thrust bearing be mounted above the Ham IV
>>> even though side mounted.  The SteperIR would be a heavy load on the
>>> rotator at the top of a tower, let alone on top of a 4' mast to add
>>> leverage.
>>>
>>> 73
>>>
>>> Roger (K8RI)
>>>
>> I agree with Roger.  the 3el SteppIR is a lot of wind load for a Ham IV
>> without a thrust bearing.  Look at the W9IIX RM-16 Antenna/Rotor mount
>> for an idea of how to do this:
>>
>>         http://www.w9iix.com/ii00012.htm
>>
>> 73,
>> Clay  W7CE
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>