On 4/4/2011 3:05 PM, John Lemay wrote:
> Hi Dick
>
> It depends somewhat on whether you have a tapering boom or not, and the
> distribution of load (elements) along the boom, but a rule of thumb I use is
> to go out 2/3rds of the length to the tip.
I start out with excess truss length and move the attach point to where
the boom stays the straightest when supported only by the mast attach
point. Like Dick I start at the 2/3rds points and may or may not have
to move it.
73
Roger (K8RI)
<snip>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|