Most "silver solder" doesn't contain enough silver to be effective.
73
Jim W7RY
--------------------------------------------------
From: "don daso" <k4za@juno.com>
Sent: Wednesday, March 23, 2011 9:38 AM
To: <TowerTalk@contesting.com>
Subject: [TowerTalk] soldering radials (or any outdoor connection)
> The preferred method is to use Silver Solder.
>
> Typical rosin-core connections will deteriorate over time through
> exposure and/or contact with minerals in the soil, acid rain, &
> temperature cycles. Usually not a problem "on the ground,"
> when doing connections with radials, for instance, but can be problematic
> aloft. It IS worth the attention to detail if possible...
>
> vy 73 Don K4ZA
>
> Tower Works
> Charlotte NC
> ____________________________________________________________
> Groupon™ Official Site
> 1 ridiculously huge coupon a day. Get 50-90% off your city's best!
> http://thirdpartyoffers.juno.com/TGL3141/4d8a226baf99f2e1399st05vuc
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1204 / Virus Database: 1498/3529 - Release Date: 03/25/11
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|