Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: Fwd: Soldering Radials?

To: "'Hans Hammarquist'" <hanslg@aol.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Fwd: Fwd: Soldering Radials?
From: "Mike Baker" <k7dd@cox.net>
Date: Wed, 23 Mar 2011 22:19:44 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
OK, I guess that makes sense.
However, I live in Arizona where DRY is the norm so perhaps it isn't as much
of a problem here.

FWIW, I haven't had to solder anything for outside use in quite a while and
when I did splice an antenna wire I cleaned the flux off and sealed it with
liquid electric tape, Scotch Coat and then either a wrap of 333 electric
tape or heat shrink and then more Scotch Coat. Looks like crap but it stays
dry, clean and unexposed to the elements. This of course is in reference to
insulated antenna wire. Ground wires I never made much of an effort to
protect the connection. 

FYI, today I use a single ground plate with 48 stainless screws mounted to
it for radial connections. It solves the problem and allows for easy wire
changes if necessary due to the lawnmower or weed wacker chewing up an
errant wire.

Mike Baker  K7DD
K7dd@cox.net


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Hans Hammarquist
Sent: Wednesday, March 23, 2011 8:30 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Fwd: Soldering Radials?

Sorry for the bad spelling.

Hans

-----Original Message-----



From: Mike Baker <k7dd@cox.net>

To: 'F5vjc' <foxfive.vjc@gmail.com>; TowerTalk <TowerTalk@contesting.com>

Sent: Wed, Mar 23, 2011 10:17 am

Subject: Re: [TowerTalk] Soldering Radials?





Why wouldn't 60/40 Rosin Core Solder work outside? That's news to me and I



have used it forever on any electrical connection inside or outside without



any problems. What did I miss?







Mike Baker  K7DD



K7dd@cox.net







For one, you missed corrosion. Things tend to be dirty outside. Dirt acts as


carrier of humidity (read; electrolyte). Copper - Tin/Lead is dissimilar
metals 

and that in combination with the electrolyte results in speedy corrosion of
the 

solder joint.



Hans - N2JFS



 

_______________________________________________







_______________________________________________

TowerTalk mailing list

TowerTalk@contesting.com

http://lists.contesting.com/mailman/listinfo/towertalk




 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>