>>>AA6YQ comments below
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Pete Smith
Sent: Friday, March 04, 2011 5:09 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] OR-2800PX Point and Shoot?
Maybe no need to reinvent the wheel, *if* the 2800 can be equipped with
an RS-232 port, and if it emulates one of the well-known rotator protocols
>>>The RC2800P-A can be equipped with an RS-232 port. It has a well-defined
protocol, but not one used by any other rotator controller (it's very
similar to the RC2800PX protocol). Controlling it from an Arduino or PIC or
8051 or anything else that's Turing-complete and has a serial port would be
straightforward.
73,
Dave, AA6YQ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|