Thanks to all that replied..
Good info from all of you, some of the info I did not think about and I know it
will make the job easier
Daryll kg9nd.
________________________________
From: James Wolf <jbwolf@comcast.net>
To: towertalk@contesting.com
Sent: Sat, January 29, 2011 4:48:43 PM
Subject: Re: [TowerTalk] HDR-300A info
Daryll,
Make sure to check the output of the regulators in the control unit. I have
had the +5V regulator fail twice. The symptoms are the same as you are
describing.
Jim, KR9U
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Daryll Webb
Sent: Saturday, January 29, 2011 9:59 AM
To: TowerTalk@contesting.com
Subject: [TowerTalk] HDR-300A info
Hello to all name hr Daryll kg9nd
I have the hy gain hdr300a it has been setting for about one year.
The potentiometer will not change readings on the dig box. Has anyone else
had
this happen the them?
The other thing is if I turn cw to the limit I must turn ccw half way around
before I can turn cw again.
Same thing if I turn ccw to the limit I must turn cw half way around before
I
can turn ccw again.
If anyone has had this happen to them some info would be nice.
Thanks Daryll kg9nd
*********
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|