On 12/29/2010 01:24 PM, Paul Ferguson wrote:
> I made an EZNEC model of a 160M Inverted-L with one elevated radial. From the
> impedances I am seeing, I think I have something wrong.
>
> If you have an EZNEC model of a 160M Inverted-L with one or more elevated
> radials, could you please send it to me. I'll inspect it and modify it to fit
> my case.
I've got one better than you - the double L.
It takes up even less space than an inverted L with one
elevated radial, and has the point of maximum current
much higher above ground.
In ASCII art, they look like this:
+--------------------------------
|
|
X
|
|
+--------------------------------
Mine consists of a little less than 260' of THHN wire.
I have a choke balun at the feedpoint.
I'll mail you the NEC file off list, since the list eats
attachments. My NEC file has very poor ground, since that's
what I have here in New Hampshire. You may want to modify
the ground to be a little better.
--
All rights reversed.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|