A Chevrolet Corvette is in my garage and they are nowhere close to it! I
have NEVER, I repeat NEVER bought an MFJ product EVER
that I didn't have an issue with. EVER. That's the facts.
I blame it on myself for giving them chances of which now I would never do
again. I wouldn't order a screw from them. Did I say NEVER?
They have NO response, NO quality, NO customer service. No hostility, just
facts.
n4zkf Dave
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of k2qmf@juno.com
Sent: Wednesday, November 24, 2010 11:32 AM
To: n7mal@citlink.net
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Cushcraft Parts from MFJ
Mal,
I don't understand your hostility against MFJ???
I have had many dealings with them and Hy-Gain and they were always
responsive and very helpful!!
As far as product quality, I'm sure that they cut corners in order to
produce a cost effective product line but they do correct any problems, you
may have, quickly and at their expense.....
They're not the Cadillac of our hobby but they sure are the Chevrolet..
What's in your garage???
Ted
On Wed, 24 Nov 2010 15:19:18 -0000 "N7mal" <n7mal@citlink.net> writes:
> NO NO Jim that won't fly any longer. 20 years ago that was the excuse
> for them. They were new etc etc etc. It is now 20 years later and the
> same garbage is coming from Mississippi. Just because they have
> acquired
>
> Cushcraft and Hy Gain they haven't addressed the major problem with
> MFJ, they still produce garbage.
> 20 years ago I met Martin and thought he was an OK guy, I was in the
>
> Electronics industry then. I thought once he got his act together he
> would be a good solid business. Well it's now 20 years later and there
> has been no change in that company.
> Sorry to be so blunt but that's just the facts.
> 73
>
>
> MAL
> N7MAL
> BULLHEAD CITY, AZ
> http://www.n7mal.com
> Everyone in the world is
> entitled to be burdened
> by my opinion
>
> ----- Original Message -----
> From: Jim Thomson
> To: towertalk@contesting.com
> Sent: Tuesday, November 23, 2010 04:33
> Subject: [TowerTalk] Cushcraft Parts from MFJ
>
>
> Date: Mon, 22 Nov 2010 21:05:05 -0500
> From: "David Thompson" <thompson@mindspring.com>
> Subject: Re: [TowerTalk] Cushcraft Parts from MFJ
>
> Come on gang lighten up.
>
> MFJ is still a small company. Martin Jue and Steve Pan (the
> management) are
> trying to do a good job. I am surprised that with all the
> acquisitions they are able to keep up.
>
> ## I find that hard to believe...after looking through the entire
> mfj/ameritron catalog.....it's huge. MFJ has been around for a LONG
> time. How many decades does it take em..to 'figure it all out' ?
> Why are they still selling crap, like BN-86 baluns ? If they
> improved
> just
> some of the products..and dumped the rest, they would spend way less
> time dealing with angry end users on the phone...and resulting
> warranty issues.
> Think abt it. Why would you want to offer 16 x diffrent types of ant
> tuners ?
> Why not just make 1-3..that actually work ? One simple tuner..minus
> the
> metering
> is all anybody wants. Nobody needs a dummy load, with a built in..
> has been
> wattmeter.
> Just build one dummy load, sans metering.
>
>
>
> I sold an MFJ tuner to a fellow in Memphis and UPS put a forklift
> through the box and KOed the meter. MFJ fixed that I sent the tuner
> back to the fellow in two weeks. I helped a fellow overseas get parts
> for his
> TH-11
> which he got very quickly.
>
> Compared to Mosley and Idiom Press they run a good ship.
>
> ## IMO, Mosley has no clue whatsoever, about how to build an
> antenna,
> any antenna. Mosley still drones on about.."establishing
> resonance".... and
> '52 ohms'. Equal spaced monobanders went the way of the do-do
> bird back
> in the
> late 80's. How mosley and wilson managed to build hair pin /
> matching
> networks,
> that work on 20-15-10m is beyond me. The secret of course, is the
> trap's
> used have
> such a high R component to em.. that when added to the feedpoint Z,
> they end up closer to 50 ohms..and it's one big fudge.....swr wise.
>
> ## ever seen a 175 lb Telrex 20m yagi ? 6 x equal spaced els on
> a 46'
> boom. They
> didn't......'get it' either....and went outa business. That mystery
> black [sealed] black balun box that telrex built for their tribanders
> is a real hoot......
> after you
> cut one open with a
> band saw. You will gag.
>
> Later... Jim VE7RF
>
>
> Dave K4JRB
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
____________________________________________________________
Obama Urges Homeowners to Refinance
If you owe under $729k you probably qualify for Obama's Refi Program
http://thirdpartyoffers.juno.com/TGL3141/4ced3e2b1673739266bst04vuc
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|