Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotor Compaitibility

To: Rex Lint <rex@lint.mv.com>
Subject: Re: [TowerTalk] Rotor Compaitibility
From: Mickey Baker <fishflorida@gmail.com>
Date: Thu, 11 Nov 2010 15:02:25 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Here's an unqualified YES. I have a TTX controller with a HAM-IV rotator.

If you need any more convincing, compare the two manuals, both available on
the Hy-Gain web site:
http://www.hy-gain.com/Manuals.php

You'll find the controllers identical.

73,

Mickey N4MB


On Thu, Nov 11, 2010 at 12:02 PM, Rex Lint <rex@lint.mv.com> wrote:

> Hi folks,
>
> I've asked a number of folks if they knew definitively if the "pinouts" of
> the HAM IV and the Tailtwister were the same, so that I can just replace
> the
> HAM IV with a Tailtwister and not have to remap the cable connections in
> making the swap.  Every one had an opinion, but no one knew for sure.
>
> A second question - will a HAM IV contoller work with a Tailtwister?
>
> Do YOU?
>
>    -Rex-
>
>     Rex Lint, Consultant
>     26 Brek Drive
>     Merrimack, NH 03054
>     PH:    603-860-7651
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>