I have used a 402CD and KT-34XA since the early 1980's. There is slight SWR
change on 15 on the KT-34XA. The 402CD is mounted 9 feet above the KT-34XA.
I have not attempted changing to a Moxon version but there is much more
interaction between the XM240 and the KT-34XA. The KT-36XA loads the boom
so the boom becomes resonant on 40. I plan to upgrade using the
modification kit but use the 34XA boom to element mounts to avoid the
problem.
73 Dave K4JRB
----- Original Message -----
From: <k3mm@verizon.net>
To: <towertalk@contesting.com>
Sent: Thursday, September 02, 2010 11:32 PM
Subject: [TowerTalk] Stacking Moxon XM240 and Kt34/36xa
>
> Anyone have any feedback on thiis combination? I've got to rebuild my
> 402CD++ and thinking Moxon instead of conventional design. Have about 12
> ft of vertical separation right now.
>
> Ty K3MM
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|