Thank you for the suggestions.
I called Advanced Testing in my area and got some information. First, I
checked the trustworthiness of the concrete company.
That checked out. The technical person I spoke with had a lot experience with
concrete testing and curing. A 4" slump and
no more for this job. However, due to the very warm temperatures in the north
east, I should cover it with plastic to keep
the moisture from evaporating off the top.
I will keep the group posted and post more pictures.
Thanks.
Anthony
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of jimlux
Sent: Wednesday, September 01, 2010 09:30
To: Towertalk Reflector
Subject: [TowerTalk] concrete testing
So you have your concrete delivered, test canisters filled. You wait
28-30 days and have the canister tested and Whoops, it fails the test.
What happens next? I know that if it failed by a "little bit", most of
us would just figure, heck, use as is, that's what design margin is for.
But realistically, say it was totally defective. Is it demolish the
(huge) cube o' concrete and send a bill to concrete vendor time? (I'm
assuming the delivery contract says that if they don't deliver the right
material, they're responsible)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|