Any hardware store should carry ground clips for this purpose, I bought
mine at Lowes. One side is a clamp, the other is threaded (I believe
1/4-20) for your wire lug.
73!
-Adam
On 8/19/2010 7:00 PM, Kelley wrote:
> I just put up a Rohn 48' HDBX tower. Before I start putting up antennas,
> I want to add some more grounds to the tower. The current bolts that
> hold the tower to the base are not long enough to add another nut so I
> can attach the ground wire. I've been unable to find any longer bolts
> that will work as the unthreaded length of the longer bolts is to long,
> thus I hit the end of the thread before they are tight.
>
> My multiple part question is, does anyone know of a supplier of longer
> 9/16" bolts that are threaded their entire length? If not, does anyone
> know of some sort of clamp that would attach to the tower legs that I
> can attach ground wire to? Or, can one drill another hole in the legs to
> attach a ground wire without jeopardizing the integrity of the tower? Or ?
>
> Thanks,
>
> Kelley
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|