Go to Mouser and look for Molex connectors, I believe they are about a buck
each. I use them for my remote coax switch and tower control. I have mine
configured so that they cannot be connected incorrectly to the wrong cable.
You can get them with more than 8 pins.
73 Pete N4KW
----- Original Message -----
From: "Paul Ferguson" <Paul@PaulFerguson.us>
To: <towertalk@contesting.com>
Sent: Thursday, July 22, 2010 9:47 AM
Subject: [TowerTalk] In shack cable quick disconnects?
>I want to put some quick disconnect connectors in my shack on cables to my
> rotor control and antenna switch. Both are 8-conductor cables. I want to
> use
> two sets of plugs/sockets with different numbers of pins so I do not
> interchange the rotor and antenna switch.
>
> I looked for Cinch Jones Plugs, but found them difficult to find in 8, 10,
> or
> 12 pin sets.
>
> What would you recommend for plugs and sockets that are reliable and easy
> to
> use in cable to cable applications inside the shack?
>
> 73,
> Paul
> K5ESW
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|