Towertalk
[Top] [All Lists]

[TowerTalk] LMR900UF

To: <towertalk@contesting.com>
Subject: [TowerTalk] LMR900UF
From: "Jim Thomson" <jim.thom@telus.net>
Date: Fri, 9 Jul 2010 05:24:42 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Date: Fri, 2 Jul 2010 19:38:11 -0400
From: "Craig Clark" <jcclark@myfairpoint.net>
Subject: [TowerTalk] LMR900UF


There is no such animal as LMR900UF

Craig

Craig Clark K1QX
Radioware
PO Box 209
Rindge NH 03461
603 899 6957 
www.radio-ware.com

##  You are correct.  Per Joe Lanoue  at Times Microwave,  LMR-900-UF  was 
actually
 designed,and fabricated, and tested.   It worked very well indeed.    There 
was NO demand for
it however, so they stopped producing it.   So it actually did exist... but 
production either ceased,
or the stuff never was put into production.   Too bad.    I think it would have 
been a winner.  The large diam,
rigid coax is  a real pig to install at the best of times.    This LMR-1200DB  
I have is like trying to bend 
an aluminum  baseball bat.   

##  Now for you folks who want some really serious QRO  coax, that is also 
flexible and low loss, Times
makes this  stuff called     SFT-600.   $22.00 per ft.   Yikes ! 

##  it's like LMR-600 on steroids, same size... and they even make 7-16 male 
/female dins for it.  You just
have to win the power ball.   

Later... Jim   VE7RF

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>