Neil,
It sure is a small world! Yes, that was one of my C19XR's that I replaced
with a C31XR stack. Norm purchased it from me a long time ago and he told
me he sold it after a problem with a storm and his tower.
I did the C19XR, C31XR C39XRN and co-designed the C49XR which was a
mechanical challenge. Have fun with the C19XR as it is a good basic
antenna. I think I replaced the original wires that run between the 10 and
20 meter drivers with the newer closed sleeve.
Thanks for the information!
73
Natan W6XR
Freeville, NY
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Neil & Heather
Sent: Sunday, April 25, 2010 6:25 PM
To: Tower and HF antenna construction topics.
Subject: Re: [TowerTalk] FW: Re Force12 C19XR
Natan,
Interesting story on this C19XR,
I picked it up from a ham in Odessa, NY,
W2AD, who moved to AZ.,very recently.
I'm almost positive he said he got it from a W6
who lived up the road a ways in NY,
and had actually designed this antenna.
I just noticed Your Freeville, NY., QTH,
I'm wondering if you are the W6 he was referring to??
If so, It looks like I have one of the 1st C19XR's
and, I'm glad to say, after some "polishing" up,and
re-riviting...looks just as good as new...wow..a true
testament to the build quality of
the force12 line...
Thought you might be interested in this info... :)
Again, thanks for the help and advice...
73
Neil
AE1P
On 4/25/2010 12:03 AM, Natan Huffman wrote:
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Natan Huffman
> Sent: Saturday, April 24, 2010 11:30 PM
> To: 'Tower and HF antenna construction topics.'
> Subject: Re: [TowerTalk] Re Force12 C19XR
>
> Neil,
>
> I'm glad you saw that! The balun wires go to the 10 meter driver. You'll
> have two wires then connected from the 10 driver to the 20 meter driver.
> The 15 meter driver is part of the open sleeve and thus is parasitically
> connected to the 15 meter cell. Depending on the rev level of the C19XR,
> the closed sleeve (two wires running from the 10 driver to the 20 driver)
> may be either an encased set of two wires or just two wires without the
> outer case. Either works well but the one encased is a bit easier to work
> with.
>
> 73
>
> Natan W6XR
> Freeville, NY
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|