It is not clear from the spec sheet but it appears to be around 900MHz:
http://awapps.commscope.com/catalog/andrew/product_details.aspx?id=9428&tab=1
Ryan, N2RJ
On Tue, Apr 20, 2010 at 10:14 PM, <john@kk9a.com> wrote:
> At what frequency is this N power rating? The voltage rating for an
> Amphenol N connector is 1500 volts and for a UHF connector it is 500 volts.
>
>
>
>
> Subject: Re: [TowerTalk] Heliax Connectors
> From: Ryan Jairam
> Reply-to: "Tower and HF antenna construction topics."
> <towertalk@contesting.com>
> Date: Tue, 20 Apr 2010 20:12:12 -0400
>
>
> Unless someone is running at least 3x the legal limit, I doubt any
> amateur running legal amateur power levels will have any problem with
> either an N connector or PL259. Andrew N connectors can actually
> handle up to 10kW (peak) according to the spec sheets.
>
>
> Ryan, N2RJ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Ryan A. Jairam,
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|