Towertalk
[Top] [All Lists]

Re: [TowerTalk] Tailtwister Rotor Rehab Question

To: towertalk@contesting.com, wa3gin@comcast.net
Subject: Re: [TowerTalk] Tailtwister Rotor Rehab Question
From: K7LXC@aol.com
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Sun, 11 Apr 2010 13:34:07 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 4/10/2010 2:38:27 P.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  thanks... I'm leaning towards oil as well...I've open up  several rotors 
over 
the years... bearing all rusted with grease packed  inbetween.  The grease 
just doesn't protect them at all as best I can  tell. Maybe 3&1 is too 
light 
of an oil but 10W50 might work  fine...


        No, no, no. Read my  previous post.
 
Cheers,
Steve     K7LXC
TOWER TECH 
 
PS - There's also a chapter in my UP THE TOWER book on rotators. 
_www.championradio.com_ (http://www.championradio.com)  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>