Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 25G Tower Help

To: "'Tower and HF antenna construction topics.'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn 25G Tower Help
From: "Bill Parry" <bparry@rgv.rr.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 8 Apr 2010 13:07:38 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
If my trig is correct, the guy wire post that is 44 feet from the tower base
would need to be 95 feet tall...not an option I think!

The net effect of moving the guy wire post nearer the base of the tower is
to put more and more stress on the tower legs. The legs are engineered to
take a fixed amount of downward thrust but nothing like what is being
suggested.

It sounds to me like you have enough room for guys that support a smaller
tower, say 55 feet. (44'/.8=55 feet)

Bill W5VX



-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Robert West
Sent: Thursday, April 08, 2010 11:20 AM
To: 'Tower and HF antenna construction topics.'
Subject: Re: [TowerTalk] Rohn 25G Tower Help

If he raised the anchors, since he has such a small footprint, causing the
guys to be at a more shallow angle, would that be a real option?  If so, how
high should the anchors be raised?  

Bob-


-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
Sent: Thursday, April 08, 2010 12:15 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rohn 25G Tower Help

In a message dated 4/8/2010 4:07:39 PM Greenwich Standard Time,  
Chuck@shelbybb.com writes:

The  tower is 150' Rohn 25G.  The guy anchors are placed at 51', 51',  and
44' from the base (can't be any more because of the lot).  Rohn  used to
have a PDF document going over the requirements for anchors, guy  wires,
etc. for different guy anchor positions.  I cannot find this  document,
and all I can find is the standard one with the standard 120'  anchor
placement from the base.  Do any of you have any  recommendations or
documentation on how to figure out the correct materials  to be used to
support this tower?  Moving the guy anchor positions out  is not an
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




I'm glad you're climbing it and not me.  The correct guy  postion is about 
80% from the base, or around 120 feet.  The tower is an  accident waiting to

happen in a strong wind.  I imagine it is "exciting" to  climb.  Guys 
should be 3/16 EHS.  My guess is it only has four guy  points at most, and
was 
not erected by a tower company
 
Complete info can be found on the Rohn site.
 
Bill KH7XS
 
 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>