>
> I found that it compares favorably with a capacitance/inductance meter if
> the MFJ is use in that manor.
>
I don't have another meter, but I use my MFJ-259B to measure inductances
and capacitances and I find that it works well and compares favorably with
calculated values of inductance and labeled values of capacitance.
Inductance and capacitance measurement is probably the thing that I use mine
for most, when I'm building matching networks, etc.
It doesn't work well to measure large or tiny reactances. In fact, I think
I've heard you'll get the *best* results if the reactance is something in
the vicinity of 50 ohms.
What I usually do in practice is do a quick frequency sweep looking for any
weirdness. There's usually a band of frequencies where the meter will
report a value of inductance or capacitance that changes very little with
frequency, and that's what I look for.
I think that range happens when the reactance is not too big or small.
73
Dan
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|