Towertalk
[Top] [All Lists]

Re: [TowerTalk] rock drill

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>, towertalk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] rock drill
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Fri, 12 Mar 2010 09:38:35 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
GO to HOME DEPOT

They have a very nice Hilti  Drills you can rent, I did it  past year in San 
Antonio when installing   a few ground rod  and few pipes for vertical antennas

50 dlls per day  was not bad for a 1500 dlls drill

 J. Hector Garcia XE2K / WT6J
Mexicali B.C  DM22fp
P.O.Box 73 
El Centro CA 92244-0073
USA
http://www.xe2k.net
http://www.dxxe.org




________________________________
From: Michael Goins <wmgoins@gmail.com>
To: towertalk <TowerTalk@contesting.com>
Sent: Fri, March 12, 2010 9:26:53 AM
Subject: [TowerTalk] rock drill

There's not some outside, wild chance that someone in the San Antonio
area has a rock drill I could use or possibly rent? I now need to
drill some 1-1/2 or so holes in the bottom of the tower hole to epoxy
rebar into, and some 3/4 " holes for the sides. really want to get
this done so the tower can go up.

Michael Goins, k5wmg
Professor, Writing
University of Texas at San Antonio
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>