> Does this mean you need the master powered up to use the slave?
The master needs to be powered up to read direction (for the
meter to operate) on the slave.
73,
... Joe, W4TV
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Dick NY1E
> Sent: Thursday, February 25, 2010 9:12 AM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Dual rotor controllers
>
>
> >With two HAM-4/HAM-5/T2X controllers, remove the meter
> >fuse from one unit (this is the "slave").
>
> Does this mean you need the master powered up to use the slave?
>
> Dick NY1E
> www.ny1e.com
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|