I have a used tower in my back yard. It was used as a crank-up in the past
but I have the possibilities to put it up as a fixed tower and don't need
the maintenance problems with a crank-up. The winch was in a very
dilapidated condition when I received it too.
I was told it was a Heights tower as the sections are 8' long. I need two
tapered sections in order to put it up the way I want it.
When I am looking in the Height's catalogue I can't find anything with the
dimensions I have in the back yard. When I look in the Universal's
catalogue I find it though. Their 26-TAPR and 22-TAPR would do the job.
Anybody
knows anything that can help me?
Also, when I received the tower (in the back yard) I noticed that the
tapered ends of the tubes were facing down. I would prefer to have the tapered
ends up ,as any water will then drain out instead in inside the tubes. I
noticed the Universal have their tapered ends facing down. What is the
preferred method? To me, I would like to get as little water as possible
inside
the tubes. Is there something I don't know or am not understanding?
Hans - N2JFS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|