Steve,
It could be a wall switch, dimmer, or outlet with loose wire connections. It
could be a faulty circuit breaker or loose connections on the breaker.
good luck
Jim AA9U
--- On Tue, 1/26/10, Steve, W3AHL <w3ahl@att.net> wrote:
From: Steve, W3AHL <w3ahl@att.net>
Subject: Re: [TowerTalk] serious noise problem
To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Tuesday, January 26, 2010, 3:48 PM
If you have a portable AM radio, use it as a sniffer to locate the source of
the noise. The ferrite rod antennas are fairly directional. It's not
uncommon to have other areas of the house tapped into a circuit that is
primarily for one room. Anything outside that you haven't unplugged?
Steve, W3AHL
----- Original Message -----
From: "anthony" <k2vi@cox.net>
To: <towertalk@contesting.com>
Sent: Tuesday, January 26, 2010 4:34 PM
Subject: [TowerTalk] serious noise problem
> Im sorry...A bit off topic but im at my wits end. Im getting heavy buzzing
> noise in the broadcast band which is now unlistenable. I tried unplugging
> everything but still noise. It only dissapears when i switch the family
> room 20AMP breaker off at the main pannel. It totally dissapears. I
> unplugged everthing in every room. What the heck can it be??? Could it
> possibly be the breaker itself? Any help would be greatly appreciated. Im
> lost on this one.
>
> tony k2vi
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|