Towertalk
[Top] [All Lists]

Re: [TowerTalk] HFTA question

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] HFTA question
From: "Jim Brown" <jim@audiosystemsgroup.com>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Thu, 21 Jan 2010 08:42:45 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On Thu, 21 Jan 2010 11:12:52 EST, cqtestk4xs@aol.com wrote:

>One additional piece of info.  The further away the terrain  the less of an 
>effect it will have.  N6BV was kind enough to run some  numbers for me and 
>the numbers for the terrain were computed up to around  14000 ft.  He told 
>me there was no reason to go to any further than  that.

Yes. N6BV is a member of our contest club, and he's advised many of us 
individually about this. I live in rather mountainous terrain, and he advised 
me to use the most detailed maps and go out to that 14,000 ft distance. 

K6XX is my neighbor, and both of us have used HFTA extensively in planning our 
antenna farms. Bob is near the top of a 2,700 ft ridge, I'm at 2,000 ft on the 
west side. For both of us, terrain near the limits of that 14,000 ft data set 
has significant effect on our propagation. 

As to stacks -- as I understand it, HFTA is NOT designed to predict stacking 
gain, but rather to evaluate the effects of antennas at multiple heights in a 
stack. It is designed ONLY to predict the interaction of a horizontally 
polarized wavefront with terrain. Nothing more. Antenna directivity is NOT in 
the program. When you select a dipole or one of the Yagis, you simply raising 
the signal level by the forward gain of a typical antenna of that generic 
type. 

73,

Jim K9YC


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>