Gregg.
It is not uncommon for the 1/4" bolt on top of the rotor to become loose.
since this bolt suspends the main drive gear that gear starts to drop. it will
slowly move against the Limit Switches thus they engage and disengage
erratically. quite common problem with mine, I did replace the top clamp with
one from K7LXC andhave had no issues since
Bill, K4XT
--- On Sun, 1/17/10, Gregg Seidl <k9kl@centurytel.net> wrote:
From: Gregg Seidl <k9kl@centurytel.net>
Subject: [TowerTalk] M2 rotor question
To: TowerTalk@contesting.com
Date: Sunday, January 17, 2010, 3:47 PM
I have a DC M2 Orion rotor that is giving me some trouble. It will only turn
from 108 to 360 degrees plus a little back thru about 13 degrees. I feel like
it is against a control box limit. How can you clear it?
Gregg K9KL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|