This always happens, the vendor claims that his product is great.
WX0B blue boxes are good and are many thousands all around the world. But
will be good to know exactly how to install them. If the manual talk about
13.8V, will be great that it works perfect with 13.8V and not need to apply
more power to have it working OK. Or at least that the manual say that you
need 18V and you go with a 18V power supply the first time and not try more
power after you notice it´s not working properly.
I post asking for some help to know why my radio display a swr in the meter
when antennas connected to the 6-pack and why not when connected direct to
the radio.
Maybe is a problem in the radio meter? I don´t think so since it works OK
when antennas connected direct.
73,
Jorge
CX6VM
-----Mensaje original-----
De: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] En nombre de Bill K2OWR
Enviado el: Viernes, 01 de Enero de 2010 04:12 p.m.
Para: towertalk@contesting.com
Asunto: Re: [TowerTalk] Fw: six pack relays
:::: Now that we've almost exhausted this thread, Jorge's comment posted
earlier is somewhat revealing as to what we're up against. :-) :-) :-)
BILL
I was told by Arraysolutions that this relays will never fail, that is very
rare this to happens.
73,
Jorge
CX6VM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.431 / Virus Database: 270.14.123/2595 - Release Date: 12/31/09
08:52:00
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|