n8de@thepoint.net wrote:
> Alan,
> The best determining factor is the tower section length.
>
> 8-foot length sections are Heights,
>
There are some odd ball "cheap knockoffs" that use 8' sections as well,
but few are 22" wide and the Aluminum is soft.
73
Roger (K8RI)
> 10-foot length sections are Universal.
>
> Aluma tower makes some, too, but not familiar with that brand and
> their products.
>
> 73
> Don
> N8DE
>
> Quoting Alan Fryer <N3BJ@cox.net>:
>
>
>> I have an older aluminum tower that I would like to use, but not
>> sure of the manufacturer. Thought it was a Heights, but the leg
>> diameters are different than shown in their current designs. The
>> 22" wide sections have 1.5" diameter legs and the 18" wide sections
>> are 1.25" in diameter. Maybe it's an older Heights design ?
>>
>> Can anyone help ? I also have a super heavy duty hinge base that
>> looks like it could be used as a fold over with an Acme screw
>> arrangement.
>>
>> Thanks,
>>
>> Alan, N3BJ
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|