Towertalk
[Top] [All Lists]

Re: [TowerTalk] modifying R7

To: towertalk@contesting.com, Danny Pease <dpease@adams.net>
Subject: Re: [TowerTalk] modifying R7
From: Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
Date: Mon, 23 Nov 2009 18:16:59 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
weak fiberglass insulator at the base and OLD
need to be guyed all the time,   2 sets.



J. Hector Garcia XE2K / WT6J

   Mexicali B.C  DM22fp

P.O.Box 73 

El Centro CA 92244-0073

USA

http://www.xe2k.net

http://www.dxxe.org

--- On Mon, 11/23/09, Danny Pease <dpease@adams.net> wrote:

From: Danny Pease <dpease@adams.net>
Subject: [TowerTalk] modifying R7
To: towertalk@contesting.com
Date: Monday, November 23, 2009, 6:08 PM

Has anyone modified the R7 to remove the lower capacitance hat? I would like
to do this to improve efficiency and bandwidth on 40 meters, although it
should improve performance on all bands.
My thoughts are to remove the capacity hat just below the 10/12/meter trap
and add a 6 foot section of tubing to get it resonant again. This should
make it approximately full sized on 10 meters. Other than the mechanical
aspect, any pitfalls to this?

NG9R

No virus found in this outgoing message.
Checked by AVG - www.avg.com 
Version: 9.0.709 / Virus Database: 270.14.62/2499 - Release Date: 11/23/09
01:52:00


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>