Message: 3
Date: Thu, 12 Nov 2009 16:19:03 +0000
From: John Hensley <w5jv@hotmail.com>
Subject: [TowerTalk] Radial Wires VS a wire or screen mesh
To: <towertalk@contesting.com>, <antennas@mailman.qth.net>
Message-ID: <BAY109-W12DFB23A72E0986A9DA78A91A90@phx.gbl>
Content-Type: text/plain; charset="iso-8859-1"
Here's another dumb question: Does anyone know if a functional radial system
can be made using fencing wire mesh, say 4 x 4? If unwelded mesh were used
and laid down the length of either 1/8 wave or 1/4 wave, shouldn't it work
as well as radial wires? Or is it the radial symmetry around the driven
pole the key?
_________________________________________________________________
Rob Sherwood wrote an article in May 1977 Ham Radio Magazine describing how
he used chicken wire due to limited space in his yard.
Here's the *.pdf from his website
73 Craig
Craig Clark K1QX
Radioware
PO Box 209
Rindge NH 03461
603 899 6957
NOTE NEW EMAIL ADDRESS JCCLARK@RADIUSNORTH.NET
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|