We use exclusively Tuf-Tug. Stand off Every 25'. We use 8" between the cable
and the D-Ring.
That's the grab and one beaner.
Maybe the link below will help too.
http://www.tuf-tug.com/sc2.htm
Dave n4zkf
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of pete sias
Sent: Tuesday, September 15, 2009 11:32 PM
To: towertalk@contesting.com
Subject: [TowerTalk] fall arrestor
What are the general thoughts on spacing distance from a tower leg for a
3/8" fall arrestor cable ? I have a triangle tower with angle iron legs and
climbing pegs. My harness has a D ring at mid chest location for the
arrestor mechanism. Before I finish making the top stand off bracket I
thought I would get some advice so as to get it right the first time.....
Tnx, NØOY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|