Towertalk
[Top] [All Lists]

Re: [TowerTalk] Seeking Manual for a 70 foot Rohn TELESCOPING crank up t

To: Denis Cote <w1wv_denis@yahoo.com>
Subject: Re: [TowerTalk] Seeking Manual for a 70 foot Rohn TELESCOPING crank up tower
From: LARRY SALETZKI <wa9vrh@dishmail.net>
Date: Wed, 26 Aug 2009 19:04:53 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Denis,

I believe I have this manual but it is in my storage area and I will
not be able to get there until this weekend. Please drop me a note if
you don't hear from me by Monday.
73 Larry WA9VRH


On Wed, Aug 26, 2009 at 5:39 PM, Denis Cote<w1wv_denis@yahoo.com> wrote:
> This may be a long shot but I am in search of a manual for a 70 foot
> Rohn TELESCOPING crank up tower. I believe it is the heavy duty (HD) type due 
> to the
> size of the legs, bracing and the gear drive/drum winch supplied. The tower 
> consists of four (4) 20 foot sections, assembles inside each and slides
> on a series of aluminum capstan rollers. Size of wire rope used for this 
> tower is 5/16" diameter. The gear reduction drive has ROHN cast onto the 
> housing. It looks very similar to a Tri-Ex LM470 with the exception of 
> 2-holes per leg versus four per leg. Looking for manual so I can re-cable the 
> tower and replace sheaves.
>
> Thanks,
> Denis - W1WV
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>