Alan ... use PVC pipe -- closed on one end .... put the elements in, then
fill with varnish ... after sloshing around, pull that one out and do the
next ...etc.... when done, you can put the remaing varnish back in the can
... !!! Worky worky .. 73, Mark AA6DX
----- Original Message -----
From: "Alan Fryer" <N3BJ@cox.net>
To: "Towertalk Reflector" <towertalk@contesting.com>
Sent: Sunday, July 26, 2009 1:35 PM
Subject: Re: [TowerTalk] Gem Quad Back in Production
> What's the best way to refurb the spreaders with spar varnish ? I read
> that
> somebody "dipped" the spreaders, but I can't envision that unless a real
> long trough was used...
>
> Alan, N3BJ
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|