Dan wrote:
> Steve: I just gave a PPT presentation for our club called "Antenna Hints
> and Kinks" In that are pictures and discussion of an attachment I built
> for plowing in radials plus much more I originally mounted it on a
> large riding mower with a spool of wire above it. Since moving to
> Spokane from Texas I mounted it on my tractor. In Texas I plowed in 24
> 160m radials in less than an hour. The PPT is on our club web page
> www.sdxa.org. The link is at the bottom of the first page. There are
> thirty odd slides in it. It lasts about an hour. The slides are moved by
> double clicking and at the lower LH corner is a small speaker image.
> Double click it for the narration that goes with each slide. Nearly all
> of the ideas are mechanical gadgets used in my station which have been
> learned in 60 years of hamming. There is one slight error in the
> presentation, I referred to RG134 teflon coax and of course I meant RG142.
> Enjoy, 73, Dan, N5AR
>
p.s. If anyone wants to use this PPT for a club program you are welcome
to. I would strongly recommend that you use a laser pointer as I did to
high lite the item in the picture being discussed. The slides are all
photos and usually I am talking about some small item in a photo of a
tower with antennas on it. It would be wise to run thru the PPT ahead of
the meeting so the presenter can identify what I am talking about with
the laser pointer.
> k4fj@aol.com wrote:
>
>> I am planning a 160M vertical with radials.? I am looking for a device that
>> will attach to my tractor's 3 point hitch and cut a narrow and shallow slit
>> in the ground.? I know Verizon using something similar but it also feeds the
>> wire in the trench and it is?deeper than what I desire.
>>
>> I understand about laying radials on the ground and letting grass grow over
>> them so they disappear.? I have done that and it works when you have grass
>> or vegetation to grow.? The area I am planning to work has little vegetation
>> so I want to lay the wire in a shallow slit and tack it down with lawn
>> staples or similar.? I do not want the radial wire laying on the surface.
>>
>> Please advise if you know of a tractor implement or other device?that may
>> meet my needs.? I could use my old suburban edger with a batch of blades but
>> that isn't a lot of fun in Virginia summer heat, but it is a backup plan.
>>
>> The shallow slit could be one to two inches and make me really happy.
>>
>> 73, Steve, k4fj
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.387 / Virus Database: 270.13.12/2235 - Release Date: 07/13/09
>> 05:56:00
>>
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.387 / Virus Database: 270.13.13/2236 - Release Date: 07/13/09
> 17:57:00
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|