I use trailer wiring connectors with good success. I take two of the flat
4-wire connectors and tape them tight together to make 8-wire connectors.
They are waterproof and rugged, made to take the abuse of road grit and
wear. I use them on my rotor and switching control lines, and I¹ve had no
problems. Plus, the are readily available and cheap!
73,
Rob KA1ARB
Jerry wrote:
> What do you use for your rotator, antenna switch, etc. connectors at
> your SPG boxes? I like to disconnect my antenna feed lines and control
> lines when thunderstorms approach, etc. I've looking for ideas with
> respect to SPG box connector and the line connector plugging into the
> box. Hope that makes sense! I have use a mike connector and a Cinch
> Jones, but these seem to have problems over time. Thanks for your help.
> Jerry France
> K7LY
--
Rob Katz, Director
Legacy Center, Inc.
(919) 678-6000 x106 (919) 678-6015 fax
www.TheLegacyCenter.com
Whose life have you touched today?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|