Towertalk
[Top] [All Lists]

Re: [TowerTalk] Good Quality Pulleys

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Good Quality Pulleys
From: "Gedas" <w8bya@mchsi.com>
Date: Tue, 9 Jun 2009 21:14:37 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have ordered lots from Northern.  Some of them very heavy duty.
Have a look at:

http://www.northerntool.com/webapp/wcs/stores/servlet/NTESearch?storeId=6970&N=0&Ntk=All&Ntt=pulley&Nty=1&D=pulley&Ntx=mode+matchallpartial&Dx=mode+matchallpartial


73,
Gedas, W8BYA

Gallery at http://gedas.me


----- Original Message ----- 
From: "Richard Elizondo" <relizondo@ionoscom.com>
To: <TOWERTALK@contesting.com>
Sent: Tuesday, June 09, 2009 7:02 PM
Subject: [TowerTalk] Good Quality Pulleys


>
> Here are a few I like ...
> http://www.e-rackonline.com/store/chain-cable-rope-and-accessories/manilafib
> er-rope-b-amp-l-star-metal-lifting-blocks/193-7245434/
>
> http://store.jharlen.com/kearne303b2pj.html
>
> This one I use for am tower work -
>
> http://store.jharlen.com/hasfib3550.html
>
> What are you using it for? What Size Cable / Rope ?
>
> Richard Elizondo
> Senior Consultant
> Ionos Communications
> 361-887-6700
> relizondo@ionoscom.com
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of Robert West
> Sent: Tuesday, June 09, 2009 9:22 AM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Good Quality Pulleys
>
> Does anyone have a source of good quality, solid hub pulleys?  Prefer 6"
> diameter.  Trying to put together a good block and tackle system but all I
> can ever find are the cheap 2 piece welded hubs or small 2" solid.   Tried
> looking at garage door pulleys, cheap.  Not very robust.  And the local
> mower shop is using the cheap 2 piece welded hubs so that's out as well. 
> I
> prefer quality over price but all I seem to see are "cheap".  I never have
> trusted cheap.  Any ideas?  Not looking for a readymade block and tackle
> since I need to make the brackets to fit just so on my tower but it's not
> out of the question.
>
>
>
> Thanks!
>
>
>
> Bob-
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>