http://www.l-com.com/productfamily.aspx?id=6213
"N" male - $6.04 each in 10 unit quantity for LMR-600 series cable.
73 de Perry - K4PWO
----- Original Message -----
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
To: "RICHARD SOLOMON" <w1ksz@q.com>
Cc: "TowerTalk" <towertalk@contesting.com>
Sent: Saturday, May 16, 2009 13:46 PM
Subject: Re: [TowerTalk] LMR-600 Connector Info Sought
>
>
> RICHARD SOLOMON wrote:
>> For a 2 Meter Repeater, would you recommend UHF or N ?
>>
> To me it really doesn't matter up through 2-meters and is more of a
> personal preference.
> My own preference is N but I use them on everything and my feedlines, at
> least to the remote switches are all LMR-600. From there it still
> varies, but I use LMR or CNT 240 and the dual foil shielded RG-8X. You
> have to be careful with RG numbers and brand names to make sure you get
> what you want as ratings vary widely. On 75 and 160 I Still have some
> LMR-400 to the slopers but prefer Davis BuryFlex(TM) which I use for
> pigtails and rotator loops at the top of the tower as well.
>
>> Solder or Crimp ?
>>
>>
> I've gone to all crimp from the 240 sizes right up through LMR-600.
>> Also, where can I find connectors for LMR-600 ?
>>
>>
> I've gotten some good ones from RF Parts. IIRC they were about $12-$15
> USD depending on how many you purchase. YMMV.
>
> 73
>
> Roger (K8RI)
>>
>>
>> Thanks, Dick, W1KSZ
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|