Hi Dave,
Check with the manufacturer to be sure. As an example, Wintech says to use
the following with their worm gear winches. Not sure if you are using a worm
gear reduction.
For temperatures -20° to 50° F (-29° to
10° C) use a multipurpose lithium-based EP 1 grease. For
temperatures 30° to 120° F (-1° to 49° C) use a multipurpose
lithium-based EP 2 grease.
73,
N2TK, Tony
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of WA3GIN
Sent: Sunday, May 03, 2009 10:09 AM
To: TOWERTALK@contesting.com
Subject: [TowerTalk] Reduction Gear Box oil Question
Hi Folks,
...performing annual maint. on the old crank-up and this is the first year
we've thought to check the oil level in the crank-up reduction gear. Have
no documentation on the oil used in these gear boxes. Suggestions are
welcome.
73,
dave
wa3gin
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|